Re: how do we create snmp community strings?
hi sir, how do you have any idea on how to enabe netflow on HP E3800 switch and IBM Storewise storage? thanks
View ArticleRe: how do we create snmp community strings?
I hope you are not going to set a Read/Write community string without using SNMP v3 (encryption and authentication capable). Windows systems are not capable of SNMP v3. Most network devices and unix...
View ArticleRe: how do we create snmp community strings?
i have created SNMPv1.. i did not create read/write community string. i can now see some interface on my netflow source and a node from top10 netflow sources by percent utilization..however my...
View ArticleRe: QoS designs and network borders in a BYOD, bandwidth hungry world
I think we are in the same situation as you zackm, cell phones are about the only non-work devices that people bring to work. We also have the added benefit of being a service provider so we have so...
View ArticleRe: Where security and failure meet.
At our company each team (Windows, Linux, Networking) is responsible for defining and auditing their own security. We also have external auditors that audit both our internal and customer systems. We...
View ArticleRe: Orion NPM Architecture, Speed, and SQL
Having fast hardware and storage throughput is also part of our strategy as many others have also suggested. We also use a separate dedicated web server and also try not to overload the platform...
View ArticleRe: SCP Branded Shirt Interest?
I think I would prefer the polo in either a black or charcoal; I think that the SolarWinds logo colors work well with those.
View ArticleRe: how do we create snmp community strings?
i have IBM v7000 storage connected to a sanswitch.. how do i enable SNMP on it? the V7000 storewise has no snmp enable on its gui.. will i use the cli on the sanswitch to enable its snmp? thanks
View ArticleRe: Alerts - Percent variable being displayed as a variable
I talked with a technical support rep and found a solution.Change the following variables:${InBps} to ${InBps as bandwidth}${OutBps} to ${OutBps as bandwidth} In summary, the message looks like...
View ArticleRe: Device discovery and polling IP address
There are no access-lists blocking the snmp traffic for that device. I ran a netstat -a to try and see if any udp port 161 traffic is leaving while I'm testing the credentials but I don't see any...
View ArticleRe: How to monitor desktop, laptops and other non-essentials without showing...
You could also set those groups to best available so it would take ALL turned off before the icon turned red (then it's party time)And also don't forget to mark all your access switch ports interfaces...
View ArticleRe: Solarwinds IPAM (IP address manager)
+1I think the best way to integrate it into a NOC type of work is to scan all the company subnets, add all the DHCP servers (though maybe with read-only), set the default scan interval to 2-3hours to...
View ArticleRe: Device discovery and polling IP address
This does not make sense.Switches are L2 devices and do not have IP addresses on their interfaces.Switches are usually managed through a dedicated Vlan/Interface, not loopbacks (but some switches can...
View ArticleNCM is seeing date change as a change Cisco Nexus 5548
Subject says it all. Every day NCM sees a change in date as a change to configuration. Is there a way to not have that happen? See attached.
View ArticleRe: Making room for failure
Being at the Engineering Line Manager level but reporting to the VP means I know how easy it is to make technical mistakes and even get to participate them sometimes while at the same time needing to...
View ArticleCisco UCS server blades not showing Hardware Health of Servers option in List...
I know that UCS blade chassis' are managed through the FI's but with no link back to the FI from the production IP monitored node (Windows 2008 R2) in this case then I am too far removed from the...
View ArticleRe: Tell Us If You Think That MS Lync Is Going to Own The Corporate VoIP!
We have a fairly large enterprise with a multitude of VOIP installations including solutions from Cisco, Nortel, Avaya and NEC. We have deployed Lync and are currently using its VOIP and desktop...
View ArticleRe: how do we create snmp community strings?
the V7000 storewise has no CLI.. where will i encode the those commands? thanks
View ArticleRe: Device discovery and polling IP address
Ok...after spending a few hours this morning looking at it I have found that when I test credentials from the manage credentials engineers toolset I don't see any traffic leaving from the server in my...
View ArticleRe: How to monitor desktop, laptops and other non-essentials without showing...
What comes to my mind is to set up on these devices shutdown/sleep action to run the script (using Orion SDK) against Orion server which will make them unmanaged on shutdown/sleep and a startup/wake...
View Article